Whole House Surge Protection
& Power Surge Protectors
What we can do:
- Whole House Surge Protection
- Sub Panel Protection
- Pump/AC Equipment Protection
- Surge Strips
- Surge Outlets
- Cable TV Surge Protection
- Phone Line Surge Protection
- Structured Media Surge Protection
- Uninterruptible Power Supplies
- Media Center Power Supplies
- Ground Integrity Testing
- Complete Grounding Systems
- Lightning Protection Systems
What causes power surges and power spikes?
Power surges and power spikes can occur at any time, not just when the power is
restored after an outage. Surges and spikes can also result from lightning strikes,
downed power lines, and even your household appliances.
Why do I need special protection for my home?
With the proliferation of sophisticated and expensive computers and electronic
equipment found in so many of today’s homes, the protection of one or more surge
protectors is a definite necessity.
Electronics are becoming increasingly sophisticated and utilize technology that was
not even conceived of just five years ago. Items including televisions, stereos,
modems, microwaves, home computers, VCRs, and telephone systems are
damaged by even small voltage changes. Part of the danger is that the damage
from small surges can add up over time and may eventually shorten the life of your
equipment or even destroy it.
Don't fuses and circuit breakers protect against these surges?
No. Fuses and circuit breakers (both thermal and magnetic) respond to heat and
currents caused by faults within the home. They do not protect your household
appliances and electronic equipment from surges and spikes that come from outside
the home or through the phone or cable lines.
Is it just my computer that needs protection?
No. Any microprocessor device is vulnerable to damage or disruption and should be
protected. You will also want to be sure to protect all phones, as a person can be
seriously injured while talking on a phone during a storm.
What is a transient?
A brief (sometimes one second or less) spike or dip in electrical voltage (strength)
or electrical current (flow).
A surge protector is necessary to protect electronics against "dirty" electricity.
Electrical power has a standard voltage for most residential uses of 120 volts, and it
remains relatively steady. But when that power makes a sharp and brief jump for
any of a variety of reasons, the resulting sudden alteration in voltage can seriously
damage delicate circuits.
It doesn’t take much to damage electronic circuits. A surge is defined as a voltage
increase that lasts for as little as three nanoseconds (one nanosecond is one
billionth of a second), and significant damage can be done in that miniscule amount
of time if the voltage surge is strong enough. A spike – which lasts for only one or
two nanoseconds – can also do its share of damage, especially when several spikes
occur repeatedly over an extended period.
Voltage surges and spikes occur for a number of reasons. Perhaps the most
common is the sudden jump in voltage that occurs when high-power appliances
such as refrigerators and air conditioners first start up. The appliances need quite a
bit of electrical energy to activate compressors, that sudden and sharp increase
in flow through the lines will be felt by your electronics.
What does the Whole House Surge Device protect?
The whole house device is the first stage, heavy-duty filter for power line
disturbances. It will help protect household items such as refrigerators, freezers,
washers, dryers, dishwashers, trash compactors, air conditioners, garbage
disposals, and electric stoves.
How do I protect all my devices?
We recommend a dual stage approach to protection against harmful surges. We
recommend both stages in order to adequately protect your house form the danger
of surges. The first stage is the whole house device that is installed at the service
point entry, your electrical panel. This protects most of your major appliances.
The second stage is the plug-in surge suppressor strips. We recommend and
provide smaller surge suppression strips to protect your smaller appliances and
sensitive electronic equipment. As long as you have both stages you are getting the
best protection available.
How long will my protection devices last?
Under normal operation, the devices will operate for many years. The devices have
been engineered by an industry leading manufacturer. A world class test facility
assures maximum design efficiencies and a factory following ISO 9001 process
controls, assures maximum accuracy, quality and dependability.
Is there a warranty?
Yes. All devices provided by the manufacturer through our service carry a limited
warranty from the manufacturer. The panel-mounted surge protection device is covered by a factory warranty and a connected equipment warranty. The items covered are your major, "white" appliances such as washer, stoves, dishwasher, microwave oven, air conditioning unit, dryer, refrigerator, and freezer. The point of use, plug-in surge protection devices are covered by a factory warranty also. Hart's Home Services will be happy to assist you with warranty claims process.
Can't I just go buy surge strips at the dollar store? Why should I use yours?
As with just about everything, there is a high end and a low end to surge protectors,
and you typically get what you pay for. Low-end surge protection units offer very
little protection, and the circuits in the protector are prone to quick failure.
For quality protection, the first thing you want to look for is a surge protector that is
rated by Underwriters Laboratories (UL), which offers you the assurance that the
unit has been tested and rated to meet certain standards. Any UL-listed product will
be labeled as a "transient voltage surge protector," which means that it meets or
exceeds a set of minimum standards.
Surge protector performance is rated three ways – clamping voltage, response time
and energy absorption. The first, clamping voltage, tells you what level of voltage
surge has to occur before the surge protector activates and diverts the excess
voltage to ground. With this rating, the lower the voltage number is the better the
surge protector will perform – it takes less of a surge to activate it. For good
protection, especially for computers, look for a protector with a clamping voltage of
less than 400 volts.
Response time is the amount of time it takes for the surge protector to respond to
the surge. Obviously, a fast response time is important, so look for a unit that will
respond in one nanosecond or less. Surge protectors are not made to last forever,
so the third rating, energy absorption, indicates how much energy the unit will
absorb before it fails. For this rating, look for a unit rated at 300 joules or better, up
to around 600 joules for even better performance.
Call us today for more information on our whole-house surge protection service from a Clearwater Electrician. It makes great sense for your property, your home, and your family.
(727) 209-3410 (813) 341-0297